Tuesday, May 31, 2011

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - CHEVROLET,CAVALIER,Z24,,1986 1987

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - CHEVROLET,CAVALIER,Z24,,1986 1987 Reviews


Other Picture


Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - CHEVROLET,CAVALIER,Z24,,1986 1987 Feature

  • New 2pc Car Mask. Easy Installation.
  • Protects against Bugs,Rock and Chips. Custom Made for your Vehicle.
  • Hood opens with Mask in place
  • Covers all painted front end surfaces
  • Accomodates for pop-up headlights, fog lights, air-intakes, and all factory design features.
Fitted to cover all painted frontal surfaces, the two-piece LeBra All-Weather Car Bra is constructed with convenience in mind - you can open your hood with it in place, and the unit doesn't need to be removed when it gets wet. An inner lining made of unique knit material resists moisture while protecting the shine and finish of your car. Custom-made for your vehicle. The LeBra All-Weather Car Bra remains in place even when wet


Visit Store Now !!

Detail Products

Detail Reviews




Jun 01, 2011 08:01:04

Covercraft Front End Mask Car Bra - 2PC System, Fits 1987 1988 1989 NISSAN STANZA SDN & HTCHBACK

Covercraft Front End Mask Car Bra - 2PC System, Fits 1987 1988 1989 NISSAN STANZA SDN & HTCHBACK Reviews


Other Picture


Covercraft Front End Mask Car Bra - 2PC System, Fits 1987 1988 1989 NISSAN STANZA SDN & HTCHBACK Feature

  • New 2pc Car Mask. Easy Installation.
  • Protects against Bugs,Rock and Chips
  • Hood opens with Mask in place
  • Heavy duty vinyl with soft fleece back.
  • Custom Made for easy installation
Originally started in Germany, where Porsche covered the front of each car as it came off the production line prior to a shake-down run around their famous test track, masks have long been considered a necessity for any car owner wanting to protect the area of the car that takes the most abuse on the road - the front end, especially the leading edge of the hood and any painted areas around the grille.Quality features you'll find in every Covercraft mask:Protective air intake screens are an integral part of the mask, not separate, and they are sewn into the outside of the mask so there are no loose pieces of material inside to abrade the paint surface. Covered aluminum tabs allow adjustment at the fender wells as vinyl expands and contracts due to temperature. Take a look at a non-adjustable mask being driven down the road and you'll see why this is an important feature. Reinforced air foils prevent flapping and lift. Very few patterns don't require this feature; there is just too much air whipping around the front of your vehicle as it goes down the road, like cross-winds and back drafts from passing semi trucks. We use a micro-perforated finish on our vinyl. It allows the mask to "breathe" and permits moisture vapor to evaporate when the vehicle is driven in wet weather. Still, if a mask becomes wet and is going to be left sitting in the sun, we recommend it be removed to allow the backing to dry properly. Our heavy-gauge leather grain vinyl has a soft, protective backing. We use white non-woven fleece so you can easily see when it's time to clean the back-side of the mask. Seams are overlapped and finished with a strong, durable top stitch. Edges are covered with soft, non-abrasive felt-rimmed bindings.


Visit Store Now !!

Detail Products

Detail Reviews




May 31, 2011 11:36:04

Monday, May 30, 2011

LeBra Front End Cover 55819-01; The Ultimate In Style And Vehicle Protection

LeBra Front End Cover 55819-01; The Ultimate In Style And Vehicle Protection Reviews


Other Picture


LeBra Front End Cover 55819-01; The Ultimate In Style And Vehicle Protection Feature

  • Full front end protection for all weather conditions
  • Durable leather grain vinyl is micro-perforated drying itself as you drive
  • Custom design molds to the contours of your vehicle
  • Two piece design allows hood to open without removing cover
  • Complements today's aerodynamic shaped vehicles
Stylishly protects your vehicle from common road hazards such as rock chips, bugs, and road tar. Completely covers all painted front end surfaces. Our two piece design allows for easy under-the-hood access without removing the cover. Accommodates for pop-up headlights, fog lights, air intakes, and all factory design features. Fits like a glove and molds to the contour of your car. LeBra front end covers compliment today's aerodynamic shaped vehicles. Durable high quality leather grain vinyl makes for great all weather protection. Does not need to be removed when wet since the vinyl is micro-perforated, drying itself as you drive. Special knit backing absorbs less moisture and is gentle on your vehicle's finish. LeBra front end covers install easily, most taking 15 minutes or less. Custom installation instructions guide you through the process. All parts are pre-attached, so there are no parts to lose. And, there are no tools required for most applications! There are hundreds of applications individually tailored to fit most vehicles.


Visit Store Now !!

Detail Products

Detail Reviews




May 30, 2011 11:08:04

Friday, May 27, 2011

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - NISSAN,TITAN,2004 thru 2009

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - NISSAN,TITAN,2004 thru 2009 Reviews


Other Picture


Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - NISSAN,TITAN,2004 thru 2009 Feature

  • New 2pc Car Mask. Easy Installation.
  • Protects against Bugs,Rock and Chips. Custom Made for your Vehicle.
  • Hood opens with Mask in place
  • Covers all painted front end surfaces
  • Accomodates for pop-up headlights, fog lights, air-intakes, and all factory design features.
Fitted to cover all painted frontal surfaces, the two-piece LeBra All-Weather Car Bra is constructed with convenience in mind - you can open your hood with it in place, and the unit doesn't need to be removed when it gets wet. An inner lining made of unique knit material resists moisture while protecting the shine and finish of your car. Custom-made for your vehicle. The LeBra All-Weather Car Bra remains in place even when wet


Visit Store Now !!

Detail Products

Detail Reviews




May 28, 2011 03:58:05

Thursday, May 26, 2011

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - TOYOTA,CAMRY,,,1995 1996

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - TOYOTA,CAMRY,,,1995 1996 Reviews


Other Picture


Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - TOYOTA,CAMRY,,,1995 1996 Feature

  • New 2pc Car Mask. Easy Installation.
  • Protects against Bugs,Rock and Chips. Custom Made for your Vehicle.
  • Hood opens with Mask in place
  • Covers all painted front end surfaces
  • Accomodates for pop-up headlights, fog lights, air-intakes, and all factory design features.
Fitted to cover all painted frontal surfaces, the two-piece LeBra All-Weather Car Bra is constructed with convenience in mind - you can open your hood with it in place, and the unit doesn't need to be removed when it gets wet. An inner lining made of unique knit material resists moisture while protecting the shine and finish of your car. Custom-made for your vehicle. The LeBra All-Weather Car Bra remains in place even when wet


Visit Store Now !!

Detail Products

Detail Reviews




May 27, 2011 05:40:07

Wednesday, May 25, 2011

Lebra Car Bra for 2002 - 2004 Jeep Liberty

Lebra Car Bra for 2002 - 2004 Jeep Liberty Reviews


Other Picture


Lebra Car Bra for 2002 - 2004 Jeep Liberty Feature

  • 2002 - 2004 Jeep Liberty - Except Renegade
PROTECTION FOR THE FRONT OF YOUR CAR FROM ADVERSE WEATHER CONDITIONS, SPORTY STYLING INSTALLS IN MINUTES, CUSTOM 2 PIECE DESIGN ALLOWS HOOD TO BE OPENED WITHOUT REMOVING COVER, LEATHER GRAINED VINYL IS MICRO PERFORATED TO DRY AS YOU DRIVE, INSTRUCTIONS INCLUDED


Visit Store Now !!

Detail Products

Detail Reviews




May 26, 2011 10:08:04

Tuesday, May 24, 2011

LEBRA 4515501

LEBRA 4515501 Reviews


Other Picture


LEBRA 4515501 Feature

  • HD PROT CHRYSLER 300M99-4
HD PROT CHRYSLER 300M99-4


Visit Store Now !!

Detail Products

Detail Reviews




May 25, 2011 10:33:09

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - GMC,YUKON,2007 thru 2009

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - GMC,YUKON,2007 thru 2009 Reviews


Other Picture


Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - GMC,YUKON,2007 thru 2009 Feature

  • New 2pc Car Mask. Easy Installation.
  • Protects against Bugs,Rock and Chips. Custom Made for your Vehicle.
  • Hood opens with Mask in place
  • Covers all painted front end surfaces
  • Accomodates for pop-up headlights, fog lights, air-intakes, and all factory design features.
Fitted to cover all painted frontal surfaces, the two-piece LeBra All-Weather Car Bra is constructed with convenience in mind - you can open your hood with it in place, and the unit doesn't need to be removed when it gets wet. An inner lining made of unique knit material resists moisture while protecting the shine and finish of your car. Custom-made for your vehicle. The LeBra All-Weather Car Bra remains in place even when wet


Visit Store Now !!

Detail Products

Detail Reviews




May 24, 2011 15:29:05

Sunday, May 22, 2011

Covercraft Front End Mask Bra - 2PC System, Fits 1992-95 PONTIAC GRAND AM GT COUPE/SDN

Covercraft Front End Mask Bra - 2PC System, Fits 1992-95 PONTIAC GRAND AM GT COUPE/SDN Reviews


Other Picture


Covercraft Front End Mask Bra - 2PC System, Fits 1992-95 PONTIAC GRAND AM GT COUPE/SDN Feature

  • Full Front Area Protection
  • Protects against Bugs,Rock and Chips
  • Hood opens with Mask in place
  • Heavy duty vinyl with soft fleece back.
  • Custom Made for easy installation
Originally started in Germany, where Porsche covered the front of each car as it came off the production line prior to a shake-down run around their famous test track, masks have long been considered a necessity for any car owner wanting to protect the area of the car that takes the most abuse on the road - the front end, especially the leading edge of the hood and any painted areas around the grille.Quality features you'll find in every Covercraft mask:Protective air intake screens are an integral part of the mask, not separate, and they are sewn into the outside of the mask so there are no loose pieces of material inside to abrade the paint surface. Covered aluminum tabs allow adjustment at the fender wells as vinyl expands and contracts due to temperature. Take a look at a non-adjustable mask being driven down the road and you'll see why this is an important feature. Reinforced air foils prevent flapping and lift. Very few patterns don't require this feature; there is just too much air whipping around the front of your vehicle as it goes down the road, like cross-winds and back drafts from passing semi trucks. We use a micro-perforated finish on our vinyl. It allows the mask to "breathe" and permits moisture vapor to evaporate when the vehicle is driven in wet weather. Still, if a mask becomes wet and is going to be left sitting in the sun, we recommend it be removed to allow the backing to dry properly. Our heavy-gauge leather grain vinyl has a soft, protective backing. We use white non-woven fleece so you can easily see when it's time to clean the back-side of the mask. Seams are overlapped and finished with a strong, durable top stitch. Edges are covered with soft, non-abrasive felt-rimmed bindings.


Visit Store Now !!

Detail Products

Detail Reviews




May 23, 2011 07:53:04

Saturday, May 21, 2011

LeBra 5587801 Mask Pontiac Grand Prix

LeBra 5587801 Mask Pontiac Grand Prix Reviews


Other Picture


LeBra 5587801 Mask Pontiac Grand Prix Feature

  • Bra: 2004-2008 Pontiac Grand Prix
Bra: 2004-2008 Pontiac Grand Prix


Visit Store Now !!

Detail Products

Detail Reviews




May 21, 2011 13:05:07

Friday, May 20, 2011

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - DODGE,B100,,,1978 thru 1980

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - DODGE,B100,,,1978 thru 1980 Reviews


Other Picture


Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - DODGE,B100,,,1978 thru 1980 Feature

  • New 2pc Car Mask. Easy Installation.
  • Protects against Bugs,Rock and Chips. Custom Made for your Vehicle.
  • Hood opens with Mask in place
  • Covers all painted front end surfaces
  • Accomodates for pop-up headlights, fog lights, air-intakes, and all factory design features.
Fitted to cover all painted frontal surfaces, the two-piece LeBra All-Weather Car Bra is constructed with convenience in mind - you can open your hood with it in place, and the unit doesn't need to be removed when it gets wet. An inner lining made of unique knit material resists moisture while protecting the shine and finish of your car. Custom-made for your vehicle. The LeBra All-Weather Car Bra remains in place even when wet


Visit Store Now !!

Detail Products

Detail Reviews




May 20, 2011 17:29:04

Thursday, May 19, 2011

Covercraft Front End Mask Bra - 2PC System, Fits 1999-00 MERCURY VILLAGER/NISSAN QUEST

Covercraft Front End Mask Bra - 2PC System, Fits 1999-00 MERCURY VILLAGER/NISSAN QUEST Reviews


Other Picture


Covercraft Front End Mask Bra - 2PC System, Fits 1999-00 MERCURY VILLAGER/NISSAN QUEST Feature

  • New 2pc Car Mask. Easy Installation.
  • Protects against Bugs,Rock and Chips
  • Hood opens with Mask in place
  • Heavy duty vinyl with soft fleece back.
  • Custom Made for easy installation
Originally started in Germany, where Porsche covered the front of each car as it came off the production line prior to a shake-down run around their famous test track, masks have long been considered a necessity for any car owner wanting to protect the area of the car that takes the most abuse on the road - the front end, especially the leading edge of the hood and any painted areas around the grille.Quality features you'll find in every Covercraft mask:Protective air intake screens are an integral part of the mask, not separate, and they are sewn into the outside of the mask so there are no loose pieces of material inside to abrade the paint surface. Covered aluminum tabs allow adjustment at the fender wells as vinyl expands and contracts due to temperature. Take a look at a non-adjustable mask being driven down the road and you'll see why this is an important feature. Reinforced air foils prevent flapping and lift. Very few patterns don't require this feature; there is just too much air whipping around the front of your vehicle as it goes down the road, like cross-winds and back drafts from passing semi trucks. We use a micro-perforated finish on our vinyl. It allows the mask to "breathe" and permits moisture vapor to evaporate when the vehicle is driven in wet weather. Still, if a mask becomes wet and is going to be left sitting in the sun, we recommend it be removed to allow the backing to dry properly. Our heavy-gauge leather grain vinyl has a soft, protective backing. We use white non-woven fleece so you can easily see when it's time to clean the back-side of the mask. Seams are overlapped and finished with a strong, durable top stitch. Edges are covered with soft, non-abrasive felt-rimmed bindings.


Visit Store Now !!

Detail Products

Detail Reviews




May 19, 2011 18:46:03

Wednesday, May 18, 2011

Custom Mini-Mask Hood Protector Cover - Item # MN391n14

Custom Mini-Mask Hood Protector Cover - Item # MN391n14 Reviews


Other Picture


Custom Mini-Mask Hood Protector Cover - Item # MN391n14 Feature

  • Protect the hood from debris
  • easy to store when not in use
  • Custom fit
  • Black mini mask
Fits - 1990-1991 HONDA CIVIC SI Hatchback (2 Door) .Mini-masks were designed to protect the area of the hood that takes the most abuse.  The front area before the break of a hood is normally where most of the bugs hit and road damage occurs.


Visit Store Now !!

Detail Products

Detail Reviews




May 18, 2011 17:19:05

Tuesday, May 17, 2011

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - FORD,RANGER,,w/fogs and w/o flares,2004 2005

Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - FORD,RANGER,,w/fogs and w/o flares,2004 2005 Reviews


Other Picture


Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits - FORD,RANGER,,w/fogs and w/o flares,2004 2005 Feature

  • New 2pc Car Mask. Easy Installation.
  • Protects against Bugs,Rock and Chips. Custom Made for your Vehicle.
  • Hood opens with Mask in place
  • Covers all painted front end surfaces
  • Accomodates for pop-up headlights, fog lights, air-intakes, and all factory design features.
Fitted to cover all painted frontal surfaces, the two-piece LeBra All-Weather Car Bra is constructed with convenience in mind - you can open your hood with it in place, and the unit doesn't need to be removed when it gets wet. An inner lining made of unique knit material resists moisture while protecting the shine and finish of your car. Custom-made for your vehicle. The LeBra All-Weather Car Bra remains in place even when wet


Visit Store Now !!

Detail Products

Detail Reviews




May 17, 2011 20:43:03

Monday, May 16, 2011

Covercraft Front End Mask Bra - 2PC System, Fits 2008 thru 2010 DODGE AVENGER

Covercraft Front End Mask Bra - 2PC System, Fits 2008 thru 2010 DODGE AVENGER Reviews


Other Picture


Covercraft Front End Mask Bra - 2PC System, Fits 2008 thru 2010 DODGE AVENGER Feature

  • New 2pc Car Mask. Easy Installation.
  • Protects against Bugs,Rock and Chips
  • Hood opens with Mask in place
  • Heavy duty vinyl with soft fleece back.
  • Custom Made for easy installation
Originally started in Germany, where Porsche covered the front of each car as it came off the production line prior to a shake-down run around their famous test track, masks have long been considered a necessity for any car owner wanting to protect the area of the car that takes the most abuse on the road - the front end, especially the leading edge of the hood and any painted areas around the grille.Quality features you'll find in every Covercraft mask:Protective air intake screens are an integral part of the mask, not separate, and they are sewn into the outside of the mask so there are no loose pieces of material inside to abrade the paint surface. Covered aluminum tabs allow adjustment at the fender wells as vinyl expands and contracts due to temperature. Take a look at a non-adjustable mask being driven down the road and you'll see why this is an important feature. Reinforced air foils prevent flapping and lift. Very few patterns don't require this feature; there is just too much air whipping around the front of your vehicle as it goes down the road, like cross-winds and back drafts from passing semi trucks. We use a micro-perforated finish on our vinyl. It allows the mask to "breathe" and permits moisture vapor to evaporate when the vehicle is driven in wet weather. Still, if a mask becomes wet and is going to be left sitting in the sun, we recommend it be removed to allow the backing to dry properly. Our heavy-gauge leather grain vinyl has a soft, protective backing. We use white non-woven fleece so you can easily see when it's time to clean the back-side of the mask. Seams are overlapped and finished with a strong, durable top stitch. Edges are covered with soft, non-abrasive felt-rimmed bindings.


Visit Store Now !!

Detail Products

Detail Reviews




May 16, 2011 21:01:04

Sunday, May 15, 2011

Covercraft MM43033 Full Coverage Custom Mask - Dodge Stratus 4 Door 2001-2004

Covercraft MM43033 Full Coverage Custom Mask - Dodge Stratus 4 Door 2001-2004 Reviews


Other Picture


Covercraft MM43033 Full Coverage Custom Mask - Dodge Stratus 4 Door 2001-2004 Feature

  • Protect From Nicks/StonesProtect From ScratchesEasy InstallationCustom Tailored For Exact FitOpen Hood With Mask In Place
  • BODY STYLE:Sedan (4 Door)
  • Installation Method - Overlay
Front End Cover


Visit Store Now !!

Detail Products

Detail Reviews




May 16, 2011 00:49:11